Altair Embed - Encoders

Configure and read a US Digital S4T 4 wire quadrature incremental encoder connected to a Texas Instrument F28069M LaunchPad board.

All Embed Videos

Altair Embed - Rapid Diagram-to-Code

In under 60 seconds, blink an LED connected to an Arduino by rapidly and easily generating code from a block diagram

Videos

Altair Embed Connecting to Controller Hardware (Arduino, etc.)

How to generate code from a block diagram and move it onto target microcontroller (MCU) hardware such as an Arduino

Videos

Altair Embed Construct State Diagrams

Push-button control of an Arduino using a state chart and code generation

Videos

Altair Embed Drone DC Motor Control HIL

Hardware in the loop (HIL) testing of a speed controller for a motor used on a drone propeller

Videos

Altair Embed PMSM Sensorless Field Oriented Control HIL

Set parameters to optimize controller performance for permanent magnet synchronous motor (PMSM) without an encoder

Videos

EV Thermal Analysis: 1D and 3D Model Integration for Cockpit and Batteries

Presentation by Massimiliana Carello, from Beond & Politecnico di Torino.

Nowadays automotive climate control systems are evolving at a rapid pace to meet the overall vehicle requirements. System evaluation is one of the major requests currently faced by the automotive manufacturers and their suppliers. Thermal comfort, convenience and range are equally important user expectations, even if they may represent “opposed” performance for a modern EV, especially in an urban driving cycle.

In this framework, to achieve the expected targets and limiting the time-to-market and costs, a complete vehicle thermal model is to be developed to evaluate the cockpit thermal request for occupants' comfort at different ambient temperatures as well as solar radiation. Furthermore, the battery thermal management is to be investigated, to avoid cells damages and deterioration. The aim of this technical presentation is to highlight the integration capabilities of a lumped parameters model (1D) developed with Altair Activate for fast simulations and a CFD model (3D) of the battery liquid cooling system developed in AcuSolve. The Models realized are validated using experimental data.

Presentations, Videos

Model-Based Development with Altair

Presentation by Dr. Michael Hoffmann, Senior Vice President of Math & Systems at Altair.

Understand the motivation and vision for Altair’s Model-Based Development (MBD); the products involved; What’s New with the 2019 release of these products (including Basic Editions free for everyone!); and a bit about the future development roadmap designed to enable ever-tighter integration of 0D, 1D and 3D models using an open platform for ever-broader multi-disciplinary system simulations – made cost-affordable through Altair’s unique units-based licensing and business model.

Presentations, Videos

Modelization of a Remote Control for Miniature Circut Breaker using Activate/MotionSolve Co-simulation and Flux3D

Presentation by Remy Orban, Senior Mecatronic Designer at Schneider Electric.

A business opportunity required the adaptation of a Miniature Circuit Breaker remote control for a specific application. To comply with time to market requirement, multiphysics model was the best way to run a feasibility analysis but the mechanical sub-system complexity makes this case difficult for conventional 1D modelling. As a result, co-simulation was used to build a comprehensive model in Activate using both, electromagnetic data from Flux3D and rigid body dynamics from MotionSolve.

Presentations, Videos
View All
Have a Question? If you need assistance beyond what is provided above, please contact us.

Subscribe to join our Newsletter
Learn about product training, news, events, and more.