Support/Training for All Products  

SimLab sT Software Overview

Overview of SimLab sT key capabilities like CAD import, automatic meshing, robust analysis and interactive results

Training Materials

SimLab sT from CAD Concept to Optimized Structures

Automatically generate the best possible mesh, define manufacturing constraints and easily evaluate results.

Training Materials

SimLab sT Vibro-Acoustic Analysis

Fully automated process. Create the ideal mesh for acoustic analysis, obtain electromagnetic excitation and instantly calculate acoustic noise.

Training Materials

SimLab sT for Computational Fluid Dynamics

Process-driven setup, capture complex phenomena and investigate fluid flows interactively.

Training Materials

SimLab sT: Results Accuracy

Local refinements to increase accuracy.

Training Materials

Signal Processing

Remove noise from signal data using in-built functions with Altair Compose

Training Materials, Videos

CAE Test Data

Import various types of CAE or test data for visualization and/or manipulation in Altair Compose

Training Materials, Videos

Curve Fitting

Fit an optimized curve through imported test data with Altair Compose

Training Materials, Videos

Altair Embed™ & CCS Software Installation

Step by step instructions to install the Texas Instruments Code Composer Studio, Uniflash and Altair Embed™ software on your computer.

Training Materials, Videos

Plot Types

2D and 3D plots in Altair Compose - plot, scatter, plot3, surf, contour, contour3, waterfall, polar, semilog, loglog, area, bar

Training Materials, Videos

Operators

Operators in Altair Compose - Matrix multiplication, division, transpose, power; relational and logical operations; bitwise operations; set operations

Training Materials, Videos

Basic Plot Commands

Basic plot commands in Altair Compose - plot, subplot, grid and linewidth.

Training Materials, Videos

Defining Functions

Defining Functions in Altair Compose - variable length argument lists; use of nargin, nargout, varargin, global, and feval

Training Materials, Videos

Data Types

Data Types in Altair Compose - Complex, Double, Strings, Structures, Cell Arrays

Training Materials, Videos

Inspire Extrude Metal Workflow - Step 1

Step 1: Load Orientation

Training Materials

Inspire Extrude Metal Workflow - Step 2

Step 2: Extract Bearing

Training Materials

Inspire Extrude Metal Workflow - Step 3

Step 3: Create Billet and Material Selection

Training Materials

Inspire Extrude Metal Workflow - Step 4

Step 4: Perform Extrusion Simulation

Training Materials

Inspire Extrude Metal Workflow - Step 5

Step 5: Analyze Results

Training Materials

Inspire Extrude Polymer Workflow - Step 1

Step 1: Import Load and Extract Volumes

Training Materials

Inspire Extrude Polymer Workflow - Step 2

Step 2: Material Selection and Organizing Layers

Training Materials

Inspire Extrude Polymer Workflow - Step 3

Step 3: Process Data and Run Analysis

Training Materials

Inspire Extrude Polymer Workflow - Step 4

Step 4: Run Post Processing

Training Materials

Creating/running scripts

Introduction to creating and running scripts

Training Materials, Videos

Activate e-Mobility Series

This series discusses various aspects of system modeling for e-Mobility studies from overall performance simulations including fuel economy, to model refinements for electric engines and/or vehicle dynamics.

Fuel economy simulations
Activate model of a series-parallel hybrid electric vehicle powertrain to evaluate fuel economy and system performance.

Increasing fidelity of vehicle dynamics models
Activate models of a series-parallel hybrid electric vehicle powertrain coupled with CarSim via the Functional Mock-up Interface.

Increasing fidelity of electric engine models
Comparison of 3 different engine models for an HEV vehicle: Park equations, full 3D Flux model, table method; later one generated by Flux2D.

PMSM simple speed control
Activate model of a permanent magnet synchronous motor (PMSM) with vector control for speed or torque.

Training Materials, Videos

Arduino Series: Dimming an LED in Less than One Minute

Demonstration of rapid development with Altair Embed

Training Materials, Videos

Arduino Series: Blinking the Arduino LED

First steps in programming an Arduino

Training Materials, Videos

CAE Engineers - Get more productive using Altair Compose

This is where Altair Compose can help enable you to efficiently perform numerical computations, develop algorithms, analyze & visualize various types of data.

Training Materials, Webinars

Inspire Extrude Metal 2017.3 Help and Tutorials

Explore help and tutorial resources to learn how to navigate through Inspire Extrude Metal and its features and tools.

Training Materials

Motor Identification for InstaSPIN™ Field Oriented Control Hardware in the Loop

InstaSPIN: Motor Control solution from Texas Instruments

Training Materials, Videos

Field Oriented Control Simulation

Short introduction to the theory of closed loop field oriented control of a PMSM.

Training Materials, Videos

Field Oriented Control Hardware in the Loop

Hardware Used: TI LaunchXL-F28069M, BoostXL-DRV8301, Teknic M2310

Training Materials, Videos

Sensorless Field Oriented Control Hardware in the Loop

Employing TI's FAST (Flux, Angle, Speed, and Torque) observer

Training Materials, Videos

Altair Activate and XLDyn Integration

XLSE’s easy to use interface and project view capability is ideal for managers and teams to keep abreast of project status.

Tips & Tricks, Training Materials, Videos

Inspire Extrude 2017 Training Manual

In this training manual you will learn the step by step process used in Inspire Extrude in order to run a successful extrusion simulation. The manual will cover an overview, features and all the basic tools within the software.

Training Materials

Inspire 2018 Help and Tutorials - Windows

In these lessons you will learn to: apply supports and forces, define design spaces, run optimization, analysis, explore shapes, and export results to Evolve or an STL file.

Training Materials

Inspire 2017 Help and Tutorials - Mac

In these lessons you will learn to: apply supports and forces, define design spaces, run optimization, explore shapes, and export results to Evolve or an STL file.

Training Materials

Evolve 2017.3 Help and Tutorials - Windows

In these lessons you will learn to: use basic modeling tools, create NURBS curves and surfaces, apply transformations, edit control points, and render a scene.

Training Materials

Evolve 2017.3 Help and Tutorials - Mac

In these lessons you will learn to: use basic modeling tools, create NURBS curves and surfaces, apply transformations, edit control points, and render a scene.

Training Materials
Have a Question? If you need assistance beyond what is provided above, please contact us.

Subscribe to join our Newsletter
Learn about product training, news, events, and more.